This post may contain affiliate links. If you use these links to buy something we may earn a small commission. Thanks.
A homemade pit BBQ offers a simple way to cook meat and vegetables over charcoal or hardwood coals. It does not require an expensive grill, yet it can produce the smoky flavor, crisp exterior, and slow-cooked tenderness associated with traditional barbecue.
Learning how to make a pit BBQ requires more than digging a hole and starting a fire. You must select a safe location, use heat-resistant materials, install a stable cooking grate, and create proper airflow. This guide explains how to build and use a small backyard pit BBQ safely.
What Is a Pit BBQ?
A pit BBQ is an outdoor cooking area built at or slightly below ground level. Charcoal or hardwood burns inside the pit, while food cooks on a metal grate positioned above the hot coals.
Traditional barbecue pits can be large enough to cook whole animals, but a backyard version can be much smaller. A rectangular pit measuring approximately 3 feet long, 2 feet wide, and 12–18 inches deep provides enough room for burgers, chicken, ribs, steaks, and vegetables.

Because a homemade pit has no built-in temperature controls, you regulate the heat by adjusting the amount and position of the coals.
Materials and Tools You Will Need
Gather everything before beginning:
- Shovel
- Measuring tape
- Wooden stakes and string
- Fire-rated bricks
- Clean sand
- Food-safe stainless-steel cooking grate
- Charcoal or seasoned hardwood
- Charcoal chimney starter
- Long-handled tongs and spatula
- Heat-resistant gloves
- Instant-read meat thermometer
- Metal bucket with a tight-fitting lid
- Garden hose or bucket of water
Choose a grate manufactured specifically for cooking. Do not cook on painted, galvanized, rusted, or chemically treated metal because its coating may deteriorate when exposed to high heat.
Check Local Rules Before Digging
Contact your local authorities to determine whether open fires and permanent cooking pits are allowed in your area. Burn bans, drought restrictions, permits, and required distances can vary by location.
You should also contact the appropriate utility-location service before digging. Gas, electricity, water, or communication lines may run beneath your yard, even when no pipes or cables are visible.
If permanent fire pits are prohibited, consider using one of these portable charcoal grills instead.
Select a Safe Location
Build the pit on level, noncombustible ground away from buildings, wooden fences, decks, vehicles, trees, and dry vegetation. Do not position it beneath a roof, awning, power line, or overhanging branch.

The U.S. Fire Administration advises placing outdoor fire pits at least 10 feet from the home or anything combustible. Local regulations may require a greater distance. It also recommends maintaining a 3-foot safety zone around the fire for children and pets.
Avoid using the pit during strong wind, drought, or extremely dry weather. Always keep a hose, water bucket, or suitable fire extinguisher nearby.
Choose the Pit Dimensions
A useful starting size for a family pit BBQ is:
| Part | Suggested measurement |
|---|---|
| Length | 3 feet |
| Width | 2 feet |
| Depth | 12–18 inches |
| Grate height | 6–12 inches above the coals |
Purchase or select your cooking grate before digging. The finished opening should be slightly smaller than the grate so its edges can rest securely on the brick supports.
A shallow pit is generally easier to light and control than a very deep one. If the coals are too far beneath the food, they may not provide enough cooking heat.
Mark and Dig the Pit
Use stakes and string to outline the cooking area. Remove grass, roots, leaves, and other combustible material from the marked location and the surrounding ground.
Dig the soil evenly until the hole is approximately 12–18 inches deep. Keep the bottom level and make the sides as straight as possible.
Clear loose roots from the hole. Do not construct the pit directly beside a tree because digging can damage its roots, and nearby roots may eventually be affected by the heat.
Prepare the Base
Spread 2–3 inches of clean, dry sand across the bottom. Compact and level the sand to create a stable base for the fire bricks.
Avoid lining the pit with river rocks or other stones collected outdoors. Some stones can contain trapped moisture and may crack when heated. Do not use plastic, treated lumber, painted materials, or household construction debris anywhere inside the cooking area.
Line the Pit With Fire Bricks
Place fire-rated bricks across the bottom and along all four sides. Fit the bricks closely together to prevent soil from collapsing into the fire.
Fire bricks are designed to withstand high temperatures. Standard concrete blocks, decorative bricks, and damp stones may crack or spall under intense heat, so they should not form the hottest interior surfaces.
You can build the sidewalls one or two rows above ground level. The raised edge helps contain coals and creates a convenient support for the cooking grate.
Install the Cooking Grate
Rest the grate on top of the brick walls and confirm that it overlaps every side by several inches. Press gently on each corner to make sure it cannot slide or tip into the fire.
For more temperature control, create two grate levels. The lower position works for searing steaks and burgers, while the upper position provides gentler heat for chicken, ribs, and vegetables.
Remove the grate before lighting the fire. Clean it thoroughly and return it to the supports once the coals are ready.
Light the Charcoal or Wood
A charcoal chimney provides a convenient way to light fuel without adding a chemical flavor. If you have not used one before, follow this guide on how to use a BBQ chimney starter.
Fill the chimney with charcoal and place a natural fire starter or crumpled paper underneath it. Light the starter and allow the charcoal to burn until the upper pieces begin turning gray. Carefully pour the coals into the prepared pit.

You may also burn clean, seasoned hardwood until it produces a bed of glowing coals. Oak and hickory create a stronger smoke flavor, while apple, cherry, and pecan are milder.
Never use gasoline, kerosene, alcohol, or another highly flammable liquid to start or relight the fire.
Create Two Heat Zones
Arrange most of the coals on one side of the pit and leave the other side with fewer coals. This creates two cooking zones:
- Direct heat: Food sits directly above the coals for fast cooking and searing.
- Indirect heat: Food sits away from the main pile for slower, gentler cooking.
Use direct heat for burgers, steaks, kebabs, and thin pork chops. Use indirect heat for bone-in chicken, ribs, roasts, or food that might burn before cooking through.
For a more detailed explanation, read how to grill on indirect heat.
Cook Food on the Pit BBQ
Allow the large flames to subside before adding food. The coals should glow and have a light coating of ash.
Place the clean grate over the pit and allow it to preheat for several minutes. Lightly oil it with a folded paper towel held by long tongs. Arrange the food without overcrowding the surface.
Turn meat as necessary and move it between the hot and cool zones. If dripping fat causes flames, transfer the food to indirect heat. The tips in this guide to preventing grill flare-ups are also useful when cooking over an open pit.
Check Food With a Thermometer
Cooking time varies with food thickness, weather, fuel quantity, and the distance between the grate and coals. Always use a food thermometer instead of relying only on time or exterior color.
The USDA safe-temperature chart recommends these minimum temperatures:
| Food | Minimum internal temperature |
|---|---|
| Chicken and other poultry | 165°F |
| Ground beef, pork, lamb, and veal | 160°F |
| Beef, pork, lamb, and veal steaks, chops, and roasts | 145°F plus a 3-minute rest |
| Fish | 145°F |
Insert the thermometer into the thickest part without touching bone. If you need more guidance, see how to use a meat thermometer.
How to Control the Temperature
A pit BBQ does not have adjustable burners, but you can still manage its heat:
- Add small amounts of charcoal instead of adding an entire bag.
- Move the coals together for greater heat.
- Spread the coals apart to reduce concentrated heat.
- Raise the grate to slow down cooking.
- Move food to the indirect zone when it browns too quickly.
- Allow fresh charcoal to ignite before placing food over it.
- Use a grill-level thermometer to monitor the cooking temperature.
Do not constantly disturb the coals. Give the fire enough time to stabilize after every adjustment.
How to Put Out a Pit BBQ
When cooking is finished, remove the food and cooking grate. Spread the coals carefully with a long metal tool, then apply water gradually. Stir the wet coals and add more water until there is no flame, smoke, glow, or noticeable heat.
Stand back while adding water because hot coals can release steam. Continue monitoring the pit until it is completely cold.
Transfer cold ashes to a metal container with a tight-fitting lid. Never place warm coals in a plastic container or regular trash bin. For more details, read how to put out a charcoal grill safely.
Cover the unused pit securely so children, pets, rainwater, and debris cannot enter it.
Common Mistakes to Avoid
- Digging without locating underground utilities
- Building too close to a house, fence, or vegetation
- Using damp stones or ordinary concrete inside the fire area
- Cooking on painted or galvanized metal
- Starting the fire with gasoline
- Cooking over uncontrolled flames
- Leaving the fire unattended
- Guessing whether meat is safely cooked
- Discarding ashes before they are completely cold
- Allowing children or pets inside the safety zone
Frequently Asked Questions
How deep should a pit BBQ be?
A small backyard pit can be approximately 12–18 inches deep. It should be deep enough to contain the coals but shallow enough to provide airflow and effective cooking heat.
What wood is best for pit BBQ?
Oak is a versatile option for most meats. Hickory provides a stronger flavor for beef and pork, while apple, cherry, and pecan create milder smoke suitable for poultry and vegetables.
Can I use regular bricks?
Fire-rated bricks are preferable for the interior of the pit because they are manufactured for high-temperature exposure. Ordinary bricks or concrete blocks may crack, especially if they contain moisture.
Do I need a lid?
A lid is unnecessary for direct grilling. A purpose-built, ventilated metal cover can help retain heat during indirect cooking, but you should not seal an active fire beneath an improvised container.
Can I leave a BBQ pit uncovered?
Cover it after the fire and ashes are completely cold. A sturdy cover prevents people or animals from stepping into the pit and stops rain and debris from collecting inside.
Final Thoughts
Making a pit BBQ can be an affordable and rewarding outdoor project. Choose a permitted location, check for underground utilities, use fire-rated materials, and make sure the cooking grate is stable before lighting any fuel.
Cook over controlled coals, maintain separate direct and indirect heat zones, and use a thermometer to confirm food safety. Most importantly, supervise the fire continuously and extinguish every ember before leaving the area.